GIA report 7538802232

3.00 ct Asscher Diamond

85/100 · Refined

A strong candidate on paper; confirm its light pattern in imagery.

What reads well

A 1.03:1 length-to-width ratio sits in the classic Asscher / square emerald range.
Face-up spread (7.89 × 7.64 mm) is typical or better for a 3.00 ct Asscher / square emerald.
Table 66% and depth 68.8% fall in the typical Asscher / square emerald range.
Excellent polish and symmetry, the top finish grades.
VS1 clarity is typically eye-clean in an Asscher / square emerald.

J color in a 3.00 ct Asscher / square emerald may show some warmth, especially at the corners.
Screening only: for this Asscher / square emerald, check images or video of the exact stone for the concentric "hall of mirrors", the windmill pattern at the corners and any see-through window.

Table · Ideal: At 66%, the table sits within the typical 58–68% range for an Asscher / square emerald, balancing brightness with fire.
Total depth · Ideal: 68.8% is within the typical 60–70% range for an Asscher / square emerald, keeping weight where it contributes to face-up size and light return.
Length-to-width · Ideal: A 1.03:1 outline is within the classic 1–1.05:1 range for an Asscher / square emerald.
Polish · Ideal: Excellent polish is the top finish grade — facets are cleanly executed with nothing that would soften sparkle.
Symmetry · Ideal: Excellent symmetry is the top finish grade — facets are cleanly executed with nothing that would soften sparkle.
Girdle · Ideal: Thick, polished: a durable girdle thickness that doesn't hide meaningful weight.
Culet · Ideal: None: no visible culet facet when viewed face-up.
Color · Favorable: J may show slight warmth at the corners of an Asscher / square emerald, especially next to white metal. Yellow or rose gold tends to complement it.
Clarity · Favorable: VS1 is typically eye-clean, though step cuts show inclusions more readily — worth a close look at the images.
Fluorescence · Ideal: None: no meaningful effect on appearance.

Does the feather reach the outer edge where a setting prong could put pressure on it?
With open step facets, is the center completely eye-clean without any visible dark marks?
Can you show me the inscribed report number under a loupe before it is set?