GIA report 2235595763

3.23 ct Emerald Diamond

89/100 · Refined

A strong candidate on paper; confirm its light pattern in imagery.

What reads well

A 1.42:1 length-to-width ratio sits in the classic emerald cut range.
Face-up spread (10.31 × 7.24 mm) is typical or better for a 3.23 ct emerald cut.
Table 64% and depth 64.5% fall in the typical emerald cut range.
Excellent polish and symmetry, the top finish grades.
VS1 clarity is typically eye-clean in an emerald cut.

H color in a 3.23 ct emerald cut may show some warmth, especially at the corners.
Screening only: for this emerald cut, check images or video of the exact stone for the "hall of mirrors" step pattern, any see-through window under the table and clean corners.

Table · Ideal: At 64%, the table sits within the typical 60–69% range for an emerald cut, balancing brightness with fire.
Total depth · Ideal: 64.5% is within the typical 60–69% range for an emerald cut, keeping weight where it contributes to face-up size and light return.
Length-to-width · Ideal: A 1.42:1 outline is within the classic 1.3–1.5:1 range for an emerald cut.
Polish · Ideal: Excellent polish is the top finish grade — facets are cleanly executed with nothing that would soften sparkle.
Symmetry · Ideal: Excellent symmetry is the top finish grade — facets are cleanly executed with nothing that would soften sparkle.
Girdle · Ideal: Slightly thick, polished: a durable girdle thickness that doesn't hide meaningful weight.
Culet · Ideal: None: no visible culet facet when viewed face-up.
Color · Favorable: H is near-colorless and faces up white in most settings, though an emerald cut can show a hint of warmth at the corners.
Clarity · Favorable: VS1 is typically eye-clean, though step cuts show inclusions more readily — worth a close look at the images.
Fluorescence · Favorable: Medium Blue fluorescence is rarely visible in normal lighting.

Does the feather reach the outer edge where a setting prong could put pressure on it?
Can I view this stone in daylight to see if the blue fluorescence helps it look whiter?
With open step facets, is the center completely eye-clean without any visible dark marks?
Can you show me the inscribed report number under a loupe before it is set?